Industries
Cleanroom, data center and lab cleaning in Mountain View
Cleanroom, data center and lab cleaning for Mountain View research and technology buildings, following your gowning, cleaning sequence and access rules from the very first visit.
Printable checklist
Controlled spaces, cleaned with care
A cleanroom, lab or data hall is cleaned to protect the work inside it. Particles, fibers and residue that would never matter in an office can spoil a sample, foul an instrument or clog a server’s air intake. Cleaning these rooms is slower and more deliberate, with every step done in the same careful order.
Each visit is logged in the format your team uses, so your environmental staff can see when every room was cleaned and what was done there.
Your team sets the standard. Many cleanrooms are classified under ISO 14644-1, which grades air cleanliness by particle count from ISO Class 1 to ISO Class 9, and your environmental program decides what each room needs. The cleaning plan is written to match your procedures.
A research and technology city
Research and technology work fills offices and labs across Mountain View.
Older R&D buildings here are often refitted with wet labs and server rooms that need the same careful cleaning.
Gowning and a top-to-bottom sequence
Crews gown at your entry point in the order your procedure lists, typically hood, coverall, boots and gloves, and bring nothing into the room that your team has not approved. Inside, work runs from the ceiling down and from the cleanest zone toward the exit, so particles move away from the most sensitive areas.
Walls and pass-throughs come before benches and equipment exteriors, and floors close the visit with dedicated mops and buckets that stay in that room. Each product and tool is chosen with your environmental team.
Low-lint materials and lab benches
Wipers, mop heads and tools are low-lint and reserved for the controlled space alone. Products are the ones your program approves, often filtered water or alcohol solutions, and the crew follows the method your SOP spells out.
In wet labs, the crew cleans floors, sinks, shared counters and common equipment exteriors once your researchers have put away active experiments and samples. Benches are cleaned once your team has cleared them.
Trash and recycling leave controlled rooms in sealed bags along the exit route your procedure sets, never back through the clean side.
Raised floors, server rooms and data halls
Server rooms and data halls gather dust that ends up in equipment intakes. Raised-floor tiles are vacuumed with filtered vacuums, and the under-floor space is cleaned in sections as your facilities team lifts tiles. Cabinet exteriors, reachable cable trays and room perimeters are dusted with low-lint cloths.
Data centers control who enters and when. Visits are booked ahead, crews sign in and work with an escort wherever your rules call for one, and no equipment is touched beyond what your team approves.
Network closets, battery rooms and electrical rooms on office floors get a lighter version of the same care, with dust kept off equipment and floors kept clear.
Scheduling and what shapes the price
Controlled spaces are cleaned when work pauses, often after hours or during scheduled shutdowns. The surrounding offices, restrooms and break rooms can share one plan with the controlled areas, each on its own schedule, and touchpoint work is covered on the disinfection and sanitizing page.
Price follows the number and class of controlled rooms, gowning time, the supplies your program specifies, raised-floor area, escort requirements and visit frequency. Send your room list and procedures through the quote request, and a walkthrough builds the written plan.
Gowning rooms, airlocks and the halls between
When a Mountain View R&D building is refitted for labs, its controlled rooms share hallways and entries with ordinary office floors, so the spaces around them decide how much dirt reaches the clean side. Gowning room benches, lockers, garment racks and step-over lines are wiped down, and floors are mopped from the clean side of the bench outward. Airlocks and pass-through chambers are wiped inside and out, door handles and interlock buttons included, and tacky mats at each entry are peeled to a fresh sheet or swapped on the schedule your team sets.
Corridors, change rooms and the receiving areas where materials are unpacked before moving inward stay on the regular janitorial routine, with tools kept apart from the controlled-room kit. Supervisors cover these support spaces during quality inspections, checking mats, bench tops and corners against your checklist, so a problem near the entry is caught before it travels into the room.
Getting a controlled-space plan started
We walk the space with your lab manager and match the plan to your procedures.
A few useful answers
Common questions
Can your crew follow our gowning procedure?
Yes. Crews gown in the order your procedure sets, at your entry point, before every visit.
Do you clean under raised floors?
Yes. Under-floor areas are cleaned in sections when your facilities team lifts the tiles.
Who supplies cleanroom wipers and products?
Either side can. The plan names who supplies each item, and everything matches the list your environmental team approves.
Can our data hall be cleaned with an escort present?
Yes. Visits are booked ahead, and crews work with your escort and sign-in rules every time.
Can the offices and the lab share one cleaning plan?
Yes. Offices and support rooms run on their own routine, and controlled spaces follow their own sequence within the same plan.
Services